Samsung Galaxy Note 2 — Phone keep installing system data

Are you sure it said that it would update to 4.4.2? Because I also have a note note 2 and I was very excited when my phone was updating, hoping it was kit kat. But after installing nothing changed. So either this is a bug for both of us or it just was some minor software update or something. Would love if someone could explain what it is exactly.
(excuse any bad English, from Sweden )

@Giang well that's just bad !! It looks your device has stuck in the boot loop of updating because of..... Try factory resetting your device if it doesn't works then I'll say you need to flash the firmware over to your device manually. First try factory resetting if that still not fix your issue let me know I'll tell you how to flash ....

Hey @Giang try following the factory resetting steps that @Kris have mentioned have a look over here

https://www.nextpit.com/forum/565019/hard-reset-your-samsung-galaxy-note-2 let me know if it doesn't works for you. Then I'll will guide you through the flashing process.

Hey Giang,

Before moving forward with the flashing process there are some Pre-Requisites

1. Go to the Sammobile/firmware section and download the appropriate Stock ROM available.
2. Next thing is the need of downloading the latest version of ODIN, it can be found by googling. Just type "odin 3.09" they very first result will allow you to download.

Instruction:

1. Run the Odin3 v3.04.exe as an administrator, and enable the check mark on Auto reboot and F.Reset Time
2. Extract the stock ROM i.e. downloaded in the pre-requisites step 1 over to your desktop.
3. Now you need to enter in download mode which can be done by pressing and holding Volume down+ Home Key. A warning page will appear press the volume up key again to enter into the download mode.
4. Next thing you need to do is connect your device to the PC by USB cable, and do make sure that one of communication port [ID:COM] highlighted in light blue.
5. Click on the PDA and navigate the extracted file i.e it will be .tar file over to the ODIN.
6. Start downloading the binary file (i.e the ROM you have downloaded) into the device by clicking Start Button on the odin. After the downloading precess completes a green colored "PASS!" sign will appear on the upper-left box if the ROM has successfully flashed over to your device.
7. Wait a while until your device reboots itself.

It should start working normally !!

Feel free to ask any question you encounter.

Giang Vo

I'm so sorry but I don't know which ROM to download. I'm terrible with technology, please understand

Which region and network provider you are currently on Giang ? Also mention the Model number !

— modified on Jun 2, 2014, 11:58:20 AM

I'm not really in to rules and laws considering this, but if your phone still has a warranty, shouldn't you be able to return it to Samsung or your retailer and get it fixed or have it replaced.
Hope I'm helping and good luck.

@Giang Sorry for taking time in responding actually I was trying to figure out which ROM I should give to you !!! But still can't figured it actually..... well, one more thing that @Adrian has point really a good point which I was ..... Like you said you are new to this.... so tweaking it yourself might ended you up in bricking, if you're device is still covered under the warranty then I would say don't move forward with the flashing process because it could end up the warranty. But still if you want to move forward with the flashing process give me a day once I figure out the ROM you can move forward with the flashing process. And @Adrian one more thing I would like to say here is the trick I am telling @Giang is the same that samsung technician will do, in addition to the method I have ....... they will reset the Knox counter also to "0" which makes the device under warranty again.

I will look for a firmware.
Is your phone network unlocked ?

— modified on Jun 4, 2014, 5:39:14 AM

@mobile cracker Good to have you here can you suggest firmware for @Giang Vo as you are from sammobile I will say you can help him better on this

— modified on Jun 4, 2014, 6:13:07 AM

@giang I mean network unlocked not unblocked

first method
update with kies
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/

second method
if your are network unlocked you can flash any country firmware
http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=0#firmware

do not post your IMEI number and serial number here

@john i am from sammobile not from samsung

— modified on Jun 4, 2014, 6:09:50 AM

you must be using N7105 LTE Australia optus
there is no 4.4.2 update
open network or international phone receive OTA updates from Samsung
but carrier network phone gets updates from their carrier
you can install other country firmware only after unlocking your phone.

so do this first

first method
update with kies
http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/

@mobile crackers I am sorry but does that mean the same ??? sammobile or ..... ???